Transformer Desk Organizer with Wireless Charger & USB hub

Created by STEALTHO

Includes - Pen & Phone & Post-it & Copyholder, Writing board, Headphone & Sticky notes stand, Coaster, Cactus pot, Ionizer - Wireless charger, USB - hub, Laptop charger

Latest Updates from Our Project:

Mass production of electronics & package
about 1 month ago – Wed, Aug 07, 2019 at 06:45:59 PM

Hey folks,

We have tested the full functionality of electronics and have already launched the mass production. 

As you can see on the video all the ports, HDMI, headphone jack and wireless charger can work at the same time. 

We have completed the design of the package box and its filling. You can check it below.

Below is the development of a package box filling. 

We are now in the process of removing the nuances on the plastic part.

We do our best to start packing and shipping soon.

With love,


Recent news about manufacturing!
3 months ago – Fri, Jun 28, 2019 at 01:15:49 AM

Hello, friends,

We just want to let you know that we are finishing our press molds for Organizers modules. You can see them below. 

The assembled molds are sent to the Technical Control Department (TCC) where they are being tested. Next, we will test the samples of the product obtained during the molds tests. 


Dear backers, if you lost your survey email, or never received one, please use the survey recovery page! You can enter your email address here to receive another survey link. 

With love,


Plastic & Electronics coordination
3 months ago – Thu, Jun 20, 2019 at 01:45:26 AM

Hey, guys!
We hope you're having a great time and are already on vacation. Have fun on your trip! Be safe! 🤗

While the production of press molds is going on, we will show you the process of coordinating plastic parts with electronics on the video below. 

At the moment everything is going according to our schedule. 

The next steps:
 - Launching mass production of plastic,
 - Electronics production launch,
 - Assembly of all Organizers parts,
 - Packaging,
 - Shipping. 

And don't hesitate to join our Pinterest profile. Every day we add new photos of our products, share drawings and inventions ❤️️


Dear backers, if you lost your survey email, or never received one, please use the survey recovery page! You can enter your email address here to receive another survey link. 

With love,


Highlight of our production factories!
5 months ago – Sat, May 04, 2019 at 12:30:46 AM

Hello, friends!

Hope y’all are doing well 😉 

 We don't sit still!  We spent 2 weeks in the plastics and electronics factories and had carefully approached the choice of manufacturers. We personally visited several factories in order to choose the best one. We inspected the production, assembly and packaging of plastic, wireless charging boards, and USB hubs, you can see it yourself in the video below. Since there were additions in electronics during the campaign at Kickstarter, our engineers are finalizing the development of electronics, and have already begun to coordinate it with the 3D file of polycarbonate modules. The next stage is the production of moulds for the polycarbonate modules of the Organizer.  

The electronics plant we chose is the largest supplier of electronic components for campaigns such as Anker, Aukey, Baseus, Inspire, Joyroom, 1 by one, JETech, and others. 

We have also tested different types of wireless charging, and as a result we have once again made sure that the system we have chosen is of the best quality. 


Dear backers, if you lost your survey email, or never received one, please use the survey recovery page! You can enter your email address here to receive another survey link. 

 Do you want to know the latest news about STEALTHO company? 

With love,


BackerKit surveys/Headphone stand testing video & Organizer presentation on Behance
6 months ago – Tue, Apr 02, 2019 at 03:23:19 AM

Hello dear Backers,
 After the survey about the headphone stand, we finally decided to add some little touch to it. We’ve made a couple of models on a 3D printer and tested their functionality. We received a lot of questions about the height of the stand, so we’ve increased it on 2.5 cm in order to adjust it to huge headphones and also completed the pin cable hanger. As you can see this designed pin cable hanger will help you to sustain your cable, and maintain it from falling out.


According to the design of the Headphone stand, the long stand should be removable. If we produce a design like this, it will be impossible to put the stand in the small tray. 


With Behance, millions of designers, illustrators, and photographers showcase their work, share experiences, receive enthusiastic feedback and comment on colleagues' work. Also, here you can check the developments of our Transformer Organizer designed by OITO Studio, and to see more of their work HERE


Soon, you’ll receive an email from us with a special link to your BackerKit survey. It’s important to respond to your survey as quickly as you can since we need this information to fulfill your rewards.

You don’t need to create a BackerKit account to fill out your survey. When you receive the email with the survey, click the survey link to respond. Answer the questions about your reward preferences, provide shipping information, and purchase add-on items if you like. You don’t have access to this survey link yet, but it will be available soon via email!

After you respond to your survey, you can go back later and change your responses at any time before we close the surveys and get our final counts.

If you need to review your information or pledge status, you can return to your survey by clicking the link in your survey email or requesting your survey link under "Lost your survey?" on our BackerKit project page at

If you used your Facebook credentials to log in to your Kickstarter account, the BackerKit survey is sent to the email address you use for your Facebook account. If you have another email address that you prefer to use, please contact support at

Don't Miss New Projects 

Our project was featured on First Backer Newsletter and we’d like to invite you to join its growing community of Kickstarter backers - You'll receive fresh Kickstarter amazing early bird offers and awesome freebies delivered right to your inbox. Click here to subscribe. 

Part of our team is going to China for personal hardware testing which we will show you soon.

With love ❤️️



Please check the great product of our good friends!


Mouzen is an innovative ergonomic armrest, designed to optimize and support the position of your wrist, reduce pain and help you maintain an upright posture while working on the computer. Also, it looks awesome on the desk. 

Mouzen is launching on Kickstarter on April 3rd!

More info at